Mappingឧបករណ៍ដំណើរការ

Quick Landplot 1

បង្កើតសន្លឹកផែនទីដីធ្លីពេញលេញ — ផែនទីមេ ផែនទីបង្ហាញទីតាំង ក្រឡាចត្រង្គ ចំណងជើង និងអាសយដ្ឋានដី — ពីស្រទាប់ក្បាលដីដែលមានស្រាប់ តារាងកូអរដោនេ CSV ឬស្រទាប់ចំណុចព្រំដែនដែលមានស្រាប់។

រកឃើញនៅឯណា
KGA Toolbox ▸ Mapping ▸ Mapping ▸ Quick Landplot ▸ Quick Landplot 1

ទិដ្ឋភាពទូទៅ

The land plot sheet is the standard deliverable for a single-parcel survey. This tool builds the whole layout in one run instead of assembling it by hand.

ការប្រើប្រាស់

  • Choose Input Type determines which of the following parameters apply:
Input typeParameters used
Existing Parcel Feature (default)Input Feature, Plot ID (required, if more than 1 plot)
CSV TableInput Feature, X Field, Y Field, Output Coordinate System, Point ID Field, Plot ID
Existing Boundary PointInput Feature, Point ID Field, Plot ID
  • For CSV Table input, Output Coordinate System must be set explicitly — a coordinate table carries no spatial reference of its own and the tool cannot infer it.
  • Plot ID (required, if more than 1 plot) groups input records into separate plots. Leave it unset only when the input describes a single plot; otherwise every record is treated as belonging to one parcel and the geometry will be wrong.
  • Map Title and Land Address are pre-filled with Khmer template text, which you overwrite with the actual title and address. The defaults are placeholders, not finished captions.
  • Two grid intervals are set independently: Match them to the parcel size; a 50-unit grid over a very large parcel produces unreadably dense grid lines.
    • Main Map Grid Interval — default 50, for the detailed parcel view.
    • Indicator Map Grid Interval — default 100, for the smaller locator map.
  • Check Open Map? to have the finished layout opened after the run.
  • For a version that adds satellite or raster imagery beneath the parcel, use Quick Landplot 2.

ប៉ារ៉ាម៉ែត្រ

Parameters for Quick Landplot 1
ឈ្មោះប្រភេទទិន្នន័យការពិពណ៌នា
Choose Input TypeString

The form the input data takes. Default is Existing Parcel Feature.

  • Existing Parcel Feature
  • CSV Table
  • Existing Boundary Point
Input FeatureFeature Layer; Table View

The parcel layer, coordinate table, or boundary point layer supplying the geometry.

X Fieldជម្រើសField

The field holding the X coordinate. Used for CSV Table input.

Y Fieldជម្រើសField

The field holding the Y coordinate. Used for CSV Table input.

Output Coordinate Systemជម្រើសSpatial Reference

The coordinate system of the X/Y values. Required for CSV Table input.

Point ID Fieldជម្រើសField

The field numbering the boundary points around each plot.

Plot ID (required, if more than 1 plot)ជម្រើសField

The field grouping records into separate plots. Required whenever the input contains more than one plot.

Output WorkspaceWorkspace; Feature Dataset

The geodatabase or feature dataset that receives the generated datasets.

Map TitleString

The sheet title. Pre-filled with Khmer placeholder text; replace it with the actual title.

Land AddressString

The land address caption. Pre-filled with Khmer placeholder text; replace it with the actual address.

Main Map Grid Intervalជម្រើសLong

The grid interval on the main map, in map units. Default is 50.

Indicator Map Grid Intervalជម្រើសLong

The grid interval on the indicator map, in map units. Default is 100.

Open Map?ជម្រើសBoolean

Opens the generated layout when the run finishes.

របៀបប្រើ

From an existing parcel layer

  1. On the KGA Toolbox tab, in the Mapping group, open the Mapping menu, point to Quick Landplot, and click Quick Landplot 1.
  2. Leave Choose Input Type set to Existing Parcel Feature.
  3. Set Input Feature to the parcel layer.
  4. If the layer contains more than one parcel, set Plot ID.
  5. Set Output Workspace.
  6. Replace the placeholder text in Map Title and Land Address.
  7. Adjust Main Map Grid Interval and Indicator Map Grid Interval to suit the parcel size.
  8. Check Open Map? and click Run.

From a CSV coordinate table

  1. Add the CSV to the project so it appears under Standalone Tables.
  2. Open the tool and set Choose Input Type to CSV Table.
  3. Set Input Feature to the table, then set X Field and Y Field.
  4. Set Output Coordinate System — this is required for table input.
  5. Set Point ID Field and, if the table holds more than one plot, Plot ID.
  6. Complete the output, title, and grid parameters as above, then click Run.

ព័ត៌មានអាជ្ញាបណ្ណ

Requires an active KGA Toolbox license. The tool validates the license before running.

មើលផងដែរ

ត្រឡប់ទៅឯកសារណែនាំ