Cadastralឧបករណ៍ដំណើរការ

Parcel Split Optimizer

រៀបចំទីតាំងក្បាលដីបំបែកដោយស្វ័យប្រវត្តិក្នុងក្បាលដីមេ ដោយគោរពដែនកំណត់ទំហំ ចម្ងាយថយពីផ្លូវ និងវិធានទទឹងមុខ និងជម្រៅអប្បបរមា ដោយប្រើក្បួនរៀបចំមួយក្នុងចំណោមបួន។

រកឃើញនៅឯណា: KGA Toolbox ▸ Geoprocessing ▸ Cadastral Tools ▸ Parcel Split Optimizer

ទិដ្ឋភាពទូទៅ

Where Parcel Split Tool applies a division rule you specify, this tool solves the layout: give it the constraints and it finds a lot arrangement that satisfies them.

ការប្រើប្រាស់

Subdivision Method selects the layout algorithm, and the choice matters more than any other single setting:

Method	Behaviour
`Legacy_Frontage` (default)	Lays lots out along road frontage. The most realistic for typical street-fronting subdivisions.
`Grid`	A regular grid of lots. Efficient on rectangular parcels, poor on irregular ones.
`Voronoi`	Lots grown from seed points. Handles irregular parcels but produces non-rectangular lots.
`Genetic`	A search-based optimiser. Can find better layouts on awkward parcels, at the cost of a considerably longer run time.

Input Road Access is optional but effectively required for Legacy_Frontage, which needs road geometry to lay lots against. Without it, the method has no frontage to work from.
Parameters are grouped into categories on the dialog:

Category	Controls
Subdivision Setting	Minimum and maximum lot size, zoning type
Setback Setting	Road, side, and rear setbacks
Lot Rule	Minimum frontage, minimum and maximum depth
Frontage Analysis	Road search distance, frontage buffer

Maximum Depth defaults to 0, which means unlimited. Set an actual value to prevent unusably deep lots on a large parcel.
Road Search Distance defaults to 150 — how far the tool looks for a road to front lots against. Increase it if the parcel sits back from the road; the default may find no frontage at all for a deep rural parcel.
Frontage Buffer defaults to 5 and sets the tolerance used when deciding what counts as road frontage.
Constraints can conflict. A minimum lot size, minimum frontage, minimum depth, and generous setbacks may together be unsatisfiable inside the parent parcel — relax one of them if the result contains few or no lots.
Output Subdivision Lines is optional and writes the lot boundary lines as a separate layer, for symbolising the layout.

ប៉ារ៉ាម៉ែត្រ

Input and output

Parameters for Parcel Split Optimizer — Input and output
ឈ្មោះ	ប្រភេទទិន្នន័យ	ការពិពណ៌នា
Input Parent Parcel	Feature Layer	The parcel to subdivide. Polygon geometry only.
Input Road Accessជម្រើស	Feature Set	The road centreline or edge geometry lots are fronted against. Polyline geometry only. Effectively required for `Legacy_Frontage`.
Subdivision Method	String	The layout algorithm. Default is `Legacy_Frontage`. `Grid` `Voronoi` `Genetic` `Legacy_Frontage`
Output Subdivision Lots	Feature Class	The lot feature class to create.
Output Subdivision Linesជម្រើស	Feature Class	The lot boundary lines, as a separate feature class.

Subdivision Setting

Parameters for Parcel Split Optimizer — Subdivision Setting
ឈ្មោះ	ប្រភេទទិន្នន័យ	ការពិពណ៌នា
Minimum Lot Size	Double	The smallest permitted lot area.
Maximum Lot Sizeជម្រើស	Double	The largest permitted lot area.
Zoning Typeជម្រើស	String	The zoning category applied to the layout. Default is `Residential`. `Residential` `Commercial` `Mixed`

Setback Setting

Parameters for Parcel Split Optimizer — Setback Setting
ឈ្មោះ	ប្រភេទទិន្នន័យ	ការពិពណ៌នា
Road Setbackជម្រើស	Double	The setback from the road frontage.
Side Setbackជម្រើស	Double	The setback from the side boundaries.
Rear Setbackជម្រើស	Double	The setback from the rear boundary.

Lot Rule

Parameters for Parcel Split Optimizer — Lot Rule
ឈ្មោះ	ប្រភេទទិន្នន័យ	ការពិពណ៌នា
Minimum Frontage	Double	The minimum road frontage each lot must have.
Minimum Depth	Double	The minimum depth each lot must have.
Maximum Depthជម្រើស	Double	The maximum lot depth. Default is `0`, meaning unlimited.

Frontage Analysis

Parameters for Parcel Split Optimizer — Frontage Analysis
ឈ្មោះ	ប្រភេទទិន្នន័យ	ការពិពណ៌នា
Road Search Distanceជម្រើស	Double	How far to search for road geometry to front lots against. Default is `150`.
Frontage Bufferជម្រើស	Double	The tolerance used when determining road frontage. Default is `5`.

របៀបប្រើ

Add the parent parcel and the road layer to the map.
On the KGA Toolbox tab, in the Geoprocessing group, open the Cadastral Tools gallery and click Parcel Split Optimizer.
Set Input Parent Parcel, and set Input Road Access to the road geometry.
Leave Subdivision Method as Legacy_Frontage for a street-fronting layout.
Under Subdivision Setting, set Minimum Lot Size, optionally Maximum Lot Size, and the Zoning Type.
Under Setback Setting, enter the road, side, and rear setbacks required by the local rules.
Under Lot Rule, set Minimum Frontage and Minimum Depth. Set Maximum Depth if deep lots must be prevented.
Under Frontage Analysis, increase Road Search Distance if the parcel sits well back from the road.
Set Output Subdivision Lots, and Output Subdivision Lines if you want the boundary lines separately.
Click Run. If few or no lots are produced, relax one of the constraints — most often the minimum lot size or the setbacks — and run again.

ព័ត៌មានអាជ្ញាបណ្ណ

Requires an active KGA Toolbox license. The tool validates the license before running.

មើលផងដែរ

ត្រឡប់ទៅឯកសារណែនាំ